Finden Sie Stahlrohr, Nahtloses Stahlrohr, Stahlrohr auf Industry Directory, zuverlässige Hersteller / Lieferant / Fabrik aus China

Home > Produkt-Liste > Präzisionsstahlrohre > Automobilstahlrohr > En10305-1 Automobil- und Motorrad-Stahlrohr

En10305-1 Automobil- und Motorrad-Stahlrohr

600tons Per Month
Ort Von Zukunft: 
600tons Per Month


Modell:  HTSP EN10305-1


Modell Nr .: HTSP EN10305-1 Technik: Kaltgezogene Oberflächenbehandlung: Geölter Schnitt Form: Rund Gewicht: Sch40 Sch80 Stahlgüte: E215 E235 E355 Hauptmarkt: Asien, Mittlerer Osten, Europa, etc. Spezifikation: 6-68MM HS-Code: 7304391000 Typ: Nahtlos Material: Kohlenstoffstahl Verwendung: Hydraulisch / Automobil Rohr Od: 6-68mm Länge: als Kundenwunsch Lieferzeit: 30-50 Tage Marke: HTSP Herkunft: China
En10305-1 Automobile and Motorcycle Steel PipeEn10305-1 Automobile and Motorcycle Steel Pipe
Product Name E215 steel pipe E235 steel pipe E355  steel pipe
chemical analysis C:≤0.10;Si:≤0.05;Mn:≤0.70;P:≤0.025; S:≤0.025;Al:≤0.025 C:≤0.17;Si:≤0.35;Mn:≤1.20;P:≤0.025; S:≤0.025 C:≤0.22;Si:≤0.55;Mn:≤1.60;P:≤0.025; S:≤0.025
Tensile Strength +C,≥430MPa; +LC,≥380MPa;+SR,≥380MPa;+A,≥280MPa;+N,290-430MPa +C,≥480MPa; +LC,≥420MPa;+SR,≥420MPa;+A,≥315MPa;+N, 340-480MPa +C,≥640MPa; +LC,≥580MPa;+SR,≥580MPa;+A,≥450MPa;+N,490-630MPa
Yield strength +SR,≥280MPa; +N,≥215MPa +SR,≥350MPa;
  +SR,≥450MPa; +N,≥355MPa
Standard EN10305-1
Length As customer's request
Packaging Standard export packing, packed in woven bags, with two nylon slings, or can be customized as request
Heat Treatment/      Delivery Condition
  1. Cold finished (hard)   BK(+C)
Tubes do not undergo heat treatment following the final cold forming and, thus, have a rather high resistance to deformation
  1. Cold finished (soft)    BKW(+LC)
The final heat treatment is followed by cold drawing involving limited deformation. Appropriate further processing allows a certain degree of cold forming (e.g. bending, expanding)
  1. Cold finished and stress-relieved annealing BKS(+SR)
Heat treatment is applied following the last cold forming process. Subject to appropriate processing conditions, the increase in the residual stresses involved enables both forming and machining to a certain degree.
  1. Annealed    GBK(+A)
The last Cold forming process is followed by annealing in a controlled atmosphere.
  1. Normalized   NBK(+N)
The last cold forming process is followed by annealing above the upper transformation point in a controlled atmosphere.
Delivery Time Within 35-50 days from receiving deposit
Payment Term 100% L/C at sight or 30% deposit, 70% balance against copy of B/L
Usage/Application Pipes for automobile and motorcycle
Main Market Asia, Middle East, Europe, etc.

Produktgruppe : Präzisionsstahlrohre > Automobilstahlrohr

Mail an Lieferanten
  • *Fach:
  • Um:

  • *Nachrichten:
    Ihre Nachrichten muss zwischen 20-8000 Zeichen sein